Sorry, your browser does not support JavaScript!

Diamond Drills

 
Lightweight Diamond Drill - 110v

Lightweight Diamond Core Drill

A useful, hand-held diamond core drill, fitted with variable speed and a safety clutch to protect the operator should the core bit jam. The drill can be used in standard format, with chuck, to drive a wide range of core bits for general building work.
 
Capacity in brick or block: 152mm (6ins)
Power input 900w. Available in 110v only.
 
Noise: 85/NDA
Vibration: <2.5
 
 
Safety Helmet
Ear Defenders
Goggles
Safety Gloves
Safety Boots
Disposable Face Mask
Estate Car
 
Hand-held Diamond Drill

Hand-held Dimaond Drill

Hand-held diamond drills are suitable for limited drilling of reinforced concrete areas which may not be accessible by a rig, or for general drilling in block, brick or masonry. They are extremely versatile units which by the use of wet or dry adaptors and core bits give a wide range of options. A vacuum attached to the dry adaptor cools the bit and clears debris allowing dust free deep drilling of blocks, brick and some light concretes. Cavity walls can be quickly and clearly drilled with no vibration disturbance or breakthrough mess.
General guidance:
Handheld max drill size 75mm wet or dry drilling. Above this size mount unit on vacuum stand. Stand mounted max drill size 150mm
Weight: 7kg drill unit only
Motor: 1850 watt 110 volt only
Drill fitting: ½"BSP or 1¼" UNC
 
Noise: 93/108
Vibration: 2.8
 
 
Safety Helmet
Ear Defenders
Goggles
Safety Gloves
Safety Boots
Disposable Face Mask
Estate Car
 
Diamond Drill and Stand

Diamond Drill Rig

A must for efficient drilling into concrete, masonry, stone, asphalt and ceramic tiles. Various sizes and types available for diamond core drilling from 10mm to 300mm diameter. They incorporate a vacuum base to allow fastening to an even, non-porous, floor, wall or ceiling. On rough or porous surfaces the unit can be fixed using anchor bolts or wedged into position using an extending brace.
Kit includes vacuum pump, water tank, hoses and couplings. Water is pumped under low pressure through the drill to cool and clear debris from the cutting face.
Drill mast can be inclined up to 45 degrees to facilitate the drilling of angled holes.
Optional extraction kit available for suction and removal of flushing water and debris - attaches to wet pick-up vacuum.
NOTE: This must be used when drilling into ceilings.
Extension rods: length 300mm (12ins) available for drill bits in excess of 32mm dia.
Weight:
Drill Motor 13kg without core bit
Drill Stand 24kg
Vacuum Pump 10kg
Power Input:
Drill Motor 2700w 110v only
Vacuum Pump 500w 110v only
 
Noise: 98/112
Vibration: 2.8
 
 
Safety Helmet
Ear Defenders
Goggles
Safety Gloves
Safety Boots
Disposable Face Mask
Estate Car
 
Description
1 Day
3 Days
Week
Extra Day
 
Catalogue Code
Description
 
002-146
Lightweight Diamond Drill
£26.40
£35.20
£44.00
£6.29
002-149
Hand-held Diamond Wet Drill
£59.40
£79.20
£99.00
£14.16
002-178
Diamond Drill Rig
£132.00
£176.00
£220.00
£31.46
002-141
Drilling Rig Vacuum Pump
£26.40
£35.20
£44.00
£6.29
002-142
Drilling Rig Water Tank
£9.90
£13.20
£16.50
£2.37
 
ALL PRICES EXCLUDE VAT - ALL PICTURES, DIMENSIONS & WEIGHTS ARE APPROXIMATE

copyright©2021 anchoragehire.co.uk   |